Sipol impregnation 1:3

Additional information

Purpose

SIPOL IMPREGNATION 1:1 Impregnation of interior and exterior walls in the building before applying the final coating of CLASSIC, FUNGICID, WASHABLE, LATEX and FACADE SIPOL, BETOSAN and similar products that improve adhesion.

Ratios

Packaging

,

Color

Characteristics

• Penetrates deep and evenly absorbs
• Improves adhesion between substrates and new coatings
• Smanjuje potrošnju završnog premaza

Technical characteristics

Appearance: colorless, matt

Using

SIPOL IMPREGNATION 1: 1 is applied to solid, dry and dusty walls. Loose and damaged parts should be removed to a sound surface, leveled with a suitable smoothing compound, repair mortars for concrete surface or plaster. New substrates should be at least 28 days old. SIPOL IMPREGNATION 1: 1 is before use it is necessary to dilute with water in a ratio of 1: 1, mix and apply with a roller, brush or spray in 1 or 2 layer. After partial drying (60 minutes), the surface coated with impregnation is ready for application the final layer. After use, the tool should be washed with water.

Drying

At 20 ° C and relative humidity 65%: 3-4 hours completely dry.

Consumption

10-12 m2 / l (1L SI: 1L of water), depending on the type and condition of the substrate.