Allcat univ. Impregnation

Additional information


ALLCAT – UNIV. IMPREGNATION for moisture protection that impregnates, provides hydrophobic properties and makes it plastic like. It is used as a standalone protective coating and SN bond and primer before decorative paint for walls and plastering, tapping and grouting.





• It penetrates deep into the substrate and ensures a strong bond between the coating
and the substrate
• Resistant to temperature changes from -30 ° C to + 80 ° C
• Reduces water permeability, increases flexibility and strength of materials
• Resistant to weak acids and alkalis
• Additive and plasticizer for mineral binders

Technical characteristics

Appearance: colorless


Stir the ALLCAT IMPREGNATION well before use.
Allcat: water 1: 1 – For hydrophobing concrete and stone. Apply until the end of absorption.
Allcat: water 1: 2 – For hydrophobing and impregnation, ie fixing of old mortars before puttying and smoothing, one coat is sufficient;
For contact coating before applying decorative paints for walls, when continuing concreting
and before applying plasters, cement putties and smoothing compounds;
As an additive for cement adhesives, cement-lime plasters and lime-bonding plasters.
Allcat: water 1: 3 – To protect the cement-noble façade plaster, two coats are recommended;
As an additive for cement, mortars and grouts.
Allcat: water 1: 4 – As an additive for smoothing compounds.
Undiluted Allcat – For hydrophobing aerated concrete and gypsum and as an anti-dust coating;
As a protective coating it is applied in one or more layers, depending on the absorbency of the substrate.
The next layer is applied to the previously dried.


Depends on how you use it.